Humbrol Enamel Paint 14ml No 127 US Ghost Grey - Satin

A solvent-based enamel paint with a Satin finish

Usage

A solvent-based, fast dry paint developed for use on plastic model kits but which can also be used on other substrates. Matt, Satin, Gloss, Metallic, Metalcote and Clear finishes are available.

Substrate

A wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more (always check on a small test area to check suitability).

Application

Brush straight from the tin or Airbrush with a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to one part thinner. Note that Metalcote colours are designed to be polished when fully dry.

Drying Time

Matt & Satin: 20-40 minutes touch dry and upto 24 hours for hard dry. Drying times will vary according to ambient temperature and humidity. Recoat: 6 hours minimum (preferably over night).

Coverage

A 14ml tinlet covers approx 0.3m2 depending on thickness of application.

How to Clean

Brushes: Use Enamel Thinners. Airbrush: flush through using Humbrol Enamel Thinners.
Product is permanent once dry

Safety Information:
Warning. Not suitable for Children under 3 years.