Model Railways

Two of these turnouts and an SL-394 Long Crossing will form a double junction. PECO Streamline N Gauge Code 80 - Universal trackage system This ever-popular trackage system for N offers a choice of either wooden or concrete type sleeper flexible track...

Peco SL-87 Left Haned Curve Track

Peco PL-26B Passing Contact Switch Black Provides the short burst of current required to operate the PL-10, PL-10E, PL-10W, PL-10WE or PL-11 turnout motors. An invaluable advantage of the PL-26 switch over the 'probe and studs' (PL-17 / PL-18) method...

Allows the PL-50 Switch Module to be extended to any size required.

TURNOUT, LARGE RADIUS, LEFT HAND These turnouts can be used with the SL-394 Long Crossing to form a double junction. PECO Streamline N Gauge Code 80 - Universal trackage system This ever-popular trackage system for N offers a choice of either wooden or...

This crossing is designed to be used with the ST-5 Right Hand Turnout to make a crossing within the standard Setrack geometry. PECO Setrack N Gauge Code 80 - Unit trackage System The high quality rigid unit trackage system suitable for all popular brands...

SINGLE POLE CHANGEOVER SWITCH (ON/ON) Single Pole On/On Switch. Use this to switch power from one device to another or for operating items such as 2 aspect colour light signals.

CURVED TURNOUT, LARGE RADIUS, RIGHT HAND PECO Streamline N Gauge Code 80 - Universal trackage system This ever-popular trackage system for N offers a choice of either wooden or concrete type sleeper flexible track and a wide range of turnouts and...

Y TURNOUT, SMALL RADIUS 2 of these turnouts can be combined with a short crossing (SL-93) to make a compact double junction (Overall length 275mm). If you wish to mix wheel standards on your 00/H0 layout, this is the trackage to choose. Code 100 rail...

Base unit for use with the PL-10E Turnout Motor. Fixing screws and full instructions included.

CROSSING, LONG This unit can be used with 2 Y Turnouts (SL-397 or SL-E397) or Large Radius Turnouts (SL-388/9 or SL-E388/9) to form a double junction. This ever-popular trackage system for N offers a choice of either wooden or concrete type sleeper...

PROBE FOR OPERATING TURNOUT MOTORS A simple yet effective method of switching turnouts. The PL-18 Studs are inserted into the control panel, often laid out as a layout diagram. A wire is then soldered to the tag at the back, which goes to the relevant...