Description
PROBE FOR OPERATING TURNOUT MOTORS
A simple yet effective method of switching turnouts. The PL-18 Studs are inserted into the control panel, often laid out as a layout diagram. A wire is then soldered to the tag at the back, which goes to the relevant solenoid of the turnout motor. When power is applied by touching the powered PL-17 probe on the stud the Turnout Motor is activated.
PL-18 Studs and Washers
PL-10 Turnout Motors
View AllClose
Related Products
Related Products
Peco PL-43 Lectrics Wheel Scraper
Peco
£6.55
WHEEL SCRAPER
Simply connect the wires from the brush and scraper directly to your layout power supply and apply them to the driving wheels, one on each side.
Peco Pl-1005 Twistlock Twin Microswitch
Peco
£9.40
Suitable for the following scale(s):
N�HO�OO�O Scale
TwistLock is still a basic electric solenoid motor, for operating (in the main) turnouts. It is powered by a normal 16vDC supply (and can take up...
Peco PL-51 Switch Module Add On
Peco
£8.70
Allows the PL-50 Switch Module to be extended to any size required.
Peco PL-41 Rail Cleaner Track Rubber
Peco
£4.70
Abrasive rubber block for removing dirt and oxidisation from the rail surface. Improves running, particularly at low speeds.
All PECO Track Systems
Peco PL-10 Point Motor Railway Track
Peco
£8.25
Standard motor. This is the most famous type of turnout motor since it has been in production for well over 30 years and thousands of enthusiasts have been using it successfully over this period of...