Peco

Suitable for the following scale(s): N�HO�OO�O Scale TwistLock is still a basic electric solenoid motor, for operating (in the main) turnouts. It is powered by a normal 16vDC supply (and can take up...

PROBE FOR OPERATING TURNOUT MOTORS A simple yet effective method of switching turnouts. The PL-18 Studs are inserted into the control panel, often laid out as a layout diagram. A wire is then...

Suitable for the following scale(s): N¬HO¬OO¬O Scale use this switch for controlling isolated sections of track or to operate accessories.

SINGLE POLE CHANGEOVER SWITCH (ON/ON) Single Pole On/On Switch. Use this to switch power from one device to another or for operating items such as 2 aspect colour light signals.

Peco PL-26B Passing Contact Switch Black Provides the short burst of current required to operate the PL-10, PL-10E, PL-10W, PL-10WE or PL-11 turnout motors. An invaluable advantage of the PL-26...

WHEEL SCRAPER Simply connect the wires from the brush and scraper directly to your layout power supply and apply them to the driving wheels, one on each side.

Allows the PL-50 Switch Module to be extended to any size required.

Base unit for use with the PL-10E Turnout Motor. Fixing screws and full instructions included.

Girder Bridge Side, Plate Girder Type, Red Oxide Length: 113mm

Suitable for the following scale(s): N Scale This model platform system is ideal for use with Peco N Setrack, Streamline and any other unit trackage system which conforms to the same geometry. The...

If you wish to mix wheel standards on your 00/H0 layout, this is the trackage to choose. Code 100 rail allows flange depths up to 1.6mm which means that both vintage and current stock will run...

Designed to be used with our 00/H0 Code 100 track systems (Ref nos. SL-100 and 102); also with 0 Gauge Bullhead (SL-700BH) and 0-16.5/0n30 (SL-500) track systems. Design prevents adjacent rails from...